This CO2 Laser Marking Machine is widely used in the PVC,PE,PET shrink sleeve,shrink label easy tearing line high speed laser marking and some soft packing air permeable hole laser marking.
Model | SCM55 | |||
Laser Power | ≤55W | |||
Max Working Area | 300*300mm | |||
Laser Mode | CO2 R.F. metal laser tube imported from the USA | |||
Marking Speed | Online flying easy tearing line marking speed 280-300m/min(Adjustable) | |||
Repeat LocationAccuracy | ±0.01mm | |||
High Precision Sensor | RGB sensor (imported from Japan) detecting response time 200μs ,Chinese made analog encoder | |||
Power Supply | AC 220V-380V/50Hz-60Hz (1.5~2.0KW) |
1) Using fast laser perforating, holes are protective due to the round shape burning melt, not easy break.
2) High-speed detection, uniform hole size, adjustable hole spacing, any direction.
3) continuous high-speed (50-280m/min) operation, low failure rate.
Laser Perforation | Mechanical gear punching | |
Perforation Direction | Any direction | One direction |
Error Accuracy in high speed | < 0.1-0.5mm | < 1-1.5mm |
Perforation speed | 50-280meters/min | 100-180meters/min |
Hole diameter | Same size, min 0.1-0.3mm | not uniform |
Holes distance | Always keep same distance(min 0.3mm) | not uniform |
All Holes quality | Very uniform | Easy change shape during high speed working, not uniform |
Consumables part | No consumption parts | Change gears always |
Application | Cut holes, lines and so on . | Just can cut holes |
This CO2 Laser Marking Machine is widely used in the PVC,PE,PET shrink sleeve,shrink label easy tearing line high speed laser marking and some soft packing air permeable hole laser marking.
Model | SCM55 | |||
Laser Power | ≤55W | |||
Max Working Area | 300*300mm | |||
Laser Mode | CO2 R.F. metal laser tube imported from the USA | |||
Marking Speed | Online flying easy tearing line marking speed 280-300m/min(Adjustable) | |||
Repeat LocationAccuracy | ±0.01mm | |||
High Precision Sensor | RGB sensor (imported from Japan) detecting response time 200μs ,Chinese made analog encoder | |||
Power Supply | AC 220V-380V/50Hz-60Hz (1.5~2.0KW) |
1) Using fast laser perforating, holes are protective due to the round shape burning melt, not easy break.
2) High-speed detection, uniform hole size, adjustable hole spacing, any direction.
3) continuous high-speed (50-280m/min) operation, low failure rate.
Laser Perforation | Mechanical gear punching | |
Perforation Direction | Any direction | One direction |
Error Accuracy in high speed | < 0.1-0.5mm | < 1-1.5mm |
Perforation speed | 50-280meters/min | 100-180meters/min |
Hole diameter | Same size, min 0.1-0.3mm | not uniform |
Holes distance | Always keep same distance(min 0.3mm) | not uniform |
All Holes quality | Very uniform | Easy change shape during high speed working, not uniform |
Consumables part | No consumption parts | Change gears always |
Application | Cut holes, lines and so on . | Just can cut holes |
content is empty!