Views: 0 Author: Site Editor Publish Time: 2022-05-25 Origin: Site
Laser micro-structured pressure sensor with modulated sensitivity for .Laser micro-engineering, with scalability, high-efficiency, and controllability, is employed to prepare a series of micro-structures on elastomers for modulating and enhancing the sensitivity of the sensors. The device with micro-domes owns a sensitivity of −1.82 kPa −1, which is approximately 17 times better than the one based on long . Femtosecond Laser Microfabrication and Its ApplicationsFemtosecond laser materials processing which benefited the most due to these advances endowed with particular desirable merit of high-quality patterning and weaving of a wide range of materials, including metals, semiconductors, transparent materials, polymers, and bio-tissues on micro and nanoscale. To explore the advanced femtosecond laser . Lasers in Manufacturing and Materials Processing | HomeLasers in Manufacturing and Materials Processing provides an international forum for exchanging information on the development and application of laser technology across the fields of manufacturing and materials processing.The emphasis is on innovation, enhancing fundamental understanding of laser-matter interaction, numerical modeling, new experimental methods and results, practical uses of . Laser Technologies laser glass cutting thus enables a higher quality, output and yield in the high volume production of touchscreen displays for smart phones, tablet PCs and other consumer products. Even without post processing, the edge roughness achieved by our cutting process is < 2µm. In most cases the glass can be used ‘as cut . Metal Additive Manufacturing processesThere are a number of different technologies used in the metal Additive Manufacturing systems available today. Systems can be classified by the energy source or the way the material is being joined, for example using a binder, laser, heated nozzle etc. Classification is also possible by the group of materials being processed, such as plastics, metals or ceramics. Your cutting and bending solutions partner. – Wuhan SangongThe sheet metal processing industry has changed significantly in recent years, driven by Industry 4.0. In the renowned “Tech For Good” magazine, Wuhan Sangong Chief Technology Officer Christoph Rüttimann laid out what this means and why Wuhan Sangong is already focusing on Industry 5.0. Laser cutting in the fast lane: the new ByStar Fiber with 20 kilowatts of laser power. The flagship of .