English 
 |
| Quantity: | |
|---|---|
1. English version Laser cut software supporting 10 commonly used graphic formats.
2. DSP off-line control with USB port interface
3. US Imported focusing lenses, choice of 4", 2.5" focal lengths.
4. Focusing is simple by touching two button, takes only 3 seconds
6. All models feature a red dot alignment pointer, helping you to properly position your work under the laser head
7.Un-limited feed-through door , we can only add the auto-feeding system allows the use of roll material and unlimited sheet length
8.Air asist ,we will provide you one set air compressor, you can turn up/down the switch between the laser head to control the strength of air blowing. To avoid getting fired and blow away the dusk /smoke.
9. Exhaust fan&vacuum table, this pulls fumes and debris away from the work piece; the resulting vacuum is strong enough to straighten and flatten thin materials against the work table for cutting and engraving in good focus.
1. English version Laser cut software supporting 10 commonly used graphic formats.
2. DSP off-line control with USB port interface
3. US Imported focusing lenses, choice of 4", 2.5" focal lengths.
4. Focusing is simple by touching two button, takes only 3 seconds
6. All models feature a red dot alignment pointer, helping you to properly position your work under the laser head
7.Un-limited feed-through door , we can only add the auto-feeding system allows the use of roll material and unlimited sheet length
8.Air asist ,we will provide you one set air compressor, you can turn up/down the switch between the laser head to control the strength of air blowing. To avoid getting fired and blow away the dusk /smoke.
9. Exhaust fan&vacuum table, this pulls fumes and debris away from the work piece; the resulting vacuum is strong enough to straighten and flatten thin materials against the work table for cutting and engraving in good focus.
