Maintenance of Handheld Laser Cleaner

Laser cleaner for removing rusty paint from metal and wood. Durable laser cleaning head, long time working without burning the lens.

Note: To avoid personal injury and damage, maintenance of the Handheld Laser Cleaner must be performed by a professional.

1. Handheld cleaning head (upgraded cleaning head, continuous operation without burning lenses)

1.1 Daily inspection: check the protective lenses. If there is any foreign matter, use special dust-free cotton swab dipped in industrial alcohol to clean it. If the coating is broken or the lens is damaged, please replace the protective lens in time to avoid burning other optical lenses.

1.2 Regular inspection: When the machine is in use or not in use for a period of time, first check the laser module to confirm that the optical components are free of dust contamination, mold and other abnormalities before turning on the machine.

1.3 Observe the light spot: the operator can use black photo paper to check the laser output light spot. Once the spot is found to be uneven or skewed, it should be repaired in time.

2. Chiller

2.1 Dust on the condenser and filter needs to be cleaned regularly.

2.2 When the machine is transported or not used for a long time, the coolant should be drained.

2.3 When the temperature is below 2°C, please check and make sure that the chiller is working properly before using the machine to avoid damage to the laser tube, output head and chiller due to condensation of the coolant.

2.4 The coolant must be replaced in the following cases

2.4.1 The filter element has been replaced.

2.4.2 After 3 months of use.

2.4.3 Re-use after a long period of non-use.