You are here: Home » News Center » Industry News » How to maintain the hand-held laser welding machine?

How to maintain the hand-held laser welding machine?

Views: 0     Author: Site Editor     Publish Time: 2024-10-25      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
How to maintain the hand-held laser welding machine?

The hand-held laser welding machine is one of the most common welding equipment in the metal processing industry. Many people have not received relevant professional training before purchasing, so they don't know how to use it correctly and what are the precautions for use. This is very important. If we want to make good use of the hand-held laser welding machine, we still need to spend some time understanding. Then, let's introduce in detail how to maintain the hand-held laser welding machine?

Here is the content list:

l Maintenance of the machine

l The use environment of the machine

l Matters needing attention

Maintenance of the machine

The laser is the primary component of the hand-held laser welding machine. The quality of the hand-held laser welding machine directly affects the overall performance of the metal laser cutting machine. If there is a problem with its quality, it will speed up the metal laser cutting machine. Aging. In addition, the later maintenance work is also very important. After the laser has been working for a period of time, its power is inevitable. Therefore, the maintenance work of the hand-held laser welding machine is usually done to keep the laser function at a standard as much as possible. Delay the aging of the laser.

The use environment of the machine

Hand-held laser welding machines have certain requirements for the temperature of the studio. Excessive temperature will cause crashes and slow response. If the temperature is too low, it will cause damage to the trachea and cables, and easily cause breakage and air leakage. Therefore, controlling the working environment temperature of the hand-held laser welding machine is one of the key factors to delay aging.

In addition, a hand-held laser welding machine will generate a large amount of metal dust during operation. However, this dust, dust, and smoke in the air adhere to the equipment, which will increase the wear and tear between the various parts of the equipment. The dust will also affect the transmittance of the focusing lens, and indirectly affect the welding accuracy of the hand-held laser welding machine.

Matters needing attention

In the process of operating the hand-held laser welding machine, if you encounter an emergency (water leakage, abnormal laser sound, etc.), you need to press the emergency stop immediately and quickly cut off the power; the external circulating water switch of the machine must be turned on before the operation; because the laser system uses Water cooling method, the laser power supply adopts air cooling method, if the cooling system fails, it is strictly forbidden to start working;  

Not free to remove any member holding the hand-held laser welding machine can not be performed while the machine is the safe door is opened welded prohibited during laser operation, look directly into the laser beam or the reflected laser light, and with the eyes facing the laser welding head to avoid eye injury; When the hand-held laser welding machine is working, the circuit is in a high voltage and strong current state. It is strictly forbidden to touch the circuit components in the machine while working.

The aging of hand-held laser welding machines is an unstoppable trend. How to protect and delay aging is a key issue. We hope that users will do a good job of maintenance in their daily work. In addition, if there are any problems in the work of the equipment, it must not be ignored, and it must be dealt with in time to keep the equipment in good condition.

Before leaving the factory, Wuhan Sanli Optoelectronic Equipment Manufacturing Co., Ltd. has conducted a lot of tests on the handheld laser welding machine, and the quality is guaranteed. If you are engaged in the business of handheld laser welding machines and laser marking machines, you can consider using our cost-effective products.


Argus Laser, your professional laser solutions supplier since 1998 !!!
Wuhan Sunic Photoelectricity Equipment Manufacture Co.,LTD (Argus Laser) is a leading position in the Solar and Laser technology development and application. And supply advanced, high-speed laser equipment for cutting, engraving and industrial marking
  • 136000
    +
    Factory Area​​​​​​​
  • ​​​​​​​
    5000
    +

    Global Customers
  • 200
    +
    employees
  • 20
    +
    Agents
  • 300
    +
    Industry Laser Machines
  • 20
    ​​​​​​​
    +
    Specialized in laser&solar equipment

Trusted By Some Of The Best

Contact Us To Get Competitive Price

Feel free to reach out to us anytime, day or night, via fax, email, or phone. Alternatively, you can use our quick contact form to inquire about our services. We're here to answer any questions you may have.
阿斯达是===rvAUVYTsmHhE
npKfAVIwRavO nrUOptHBfdnE
Feedback
GET SOCIAL
PHONE / WhatsApp
008615927005027
ADDRESS
NO.4 Huanglong Shan North Road, East Lake High-tech District, Wuhan City, China
Email
suniclaser@sunic.com.cn

You are here: Home » News Center » Industry News » How to maintain the hand-held laser welding machine?
Argus Laser, your professional 
laser solutions supplier since 1998 !!!
Laser cutter and engraver Manufacturer and supplier in China.
 

Laser Products Category

Get In Touch

  Address: NO.4 Huanglong Shan North Road, East Lake High-tech District, Wuhan City, China
  Cel/whatsapp/wechat: :+86-15927005027
  E-mail: suniclaser@sunic.com.cn
Contact Us
Copyright  Wuhan Sunic Photoelectricity Equipment Manufacture Co.,LTD. Supported by Leadong