Views: 0 Author: Site Editor Publish Time: 2021-08-16 Origin: Site
Fiber laser marking machines are attractive for many people. But not everyone knows how to use it. Then, let's introduce in detail how to use the fiber laser marking machines?
Here is the content list:
l Routine maintenance
l Daily cleaning
l Application industry
When the fiber laser marking machine is not working, cut off the power supply of the marking machine and the computer.
When the fiber laser marking machine is not working, cover the field lens to prevent the dust from polluting the optical lens.
When the fiber laser marking machine is working, the circuit is in a high voltage state. Nonprofessionals should not check and repair it when it is started, to avoid electric shock accidents.
Cut off the power supply immediately in case of any fault.
If the fiber laser marking machine is used for a long time, the dust in the air will be adsorbed on the surface of the lower end of the focusing lens. If it is light, the laser power will be reduced and the marking effect will be affected; In serious cases, the optical lens is overheated and cracked. When the marking effect is not good, carefully check whether the surface of the focusing lens is polluted.
The cleaning method is to mix anhydrous ethanol and ether in the ratio of 3:1, use a long fiber cotton swab or lens paper to invade the mixture, and gently scrub the surface of the lower end of the focus lens. The cotton swab or lens paper must be replaced every time.
During the operation of the fiber laser marking machine, the marking machine shall not be moved to avoid damaging the machine.
Do not cover the fiber laser marking machine or put other items, so as not to affect the cooling effect of the machine.
Many people don't know much about fiber laser marking machines, so they don't know what industry they will use them in, and they don't know whether they will use them in their industry. A fiber laser marking machine is widely used. Conceptually speaking, a fiber laser marking machine can be used when it is used for marking, but the specific needs to be determined according to the materials. Some materials only need to be printed, so they don't need a laser, Because the laser is fine marking, if it is used in the rough workpiece, it is a bit overqualified, but how to know what product is suitable for fiber laser marking machine, let's give a specific example; In the hardware industry, spanners, measuring tools, sanitary ware, stainless steel tableware, medical equipment, bags, leather bags, gift industry also have many, such as metal gifts, wooden boxes, U disk, notebook, watch and clock instrument industry of metal case, bottom, glasses frame, instrument, and panel, in addition to the packaging industry and electronic communication industry of mobile phone shell, electronic components of laser marking. So through these, we know that the laser marking machine has a broad market prospect, and this market has yet to be redeveloped and re-excavated. Therefore, laser marking machine enterprises should set an example, do a good job in quality, open up the market, and bring profits when solving problems for customers, so there will be greater development space and better market prospects in the future, Looking to the future is a good start to cater to the market and create a performance.
You can contact us, our company provides the most professional fiber laser marking machine, CO2 laser marking machine and other products. After reading these, what are you still hesitating? Why not buy a fiber laser marking machine?